LEDBar Contour incorporates a number of innovative technical features that boost performance and reliability.

The core technology of the PinBoost™ is to place reinforcement components on both sides of the SMD LED, effectively reducing damage to SMT LEDs on the FPCB due to external forces caused by incorrect bending and distortion.

When electrical products are used outdoors or in high humidity environment for a long time, they can be affected by the wire capillarity effect whereby water and moisture slowly penetrate the inside of electrical equipment from the conducting wire, which will lead to equipment short circuit damage.

The core technology of the DryWire is designed to block the passage of water and moisture into the light and protect the light from water ingress through conducting wire.

The LED flex linear light with FPCB normally can only be bent up and down against the light surface. To achieve horizontal bending, FPCB will be placed vertically inside but with low brightness, or mounted with side emitting LEDs but the light source’s options are limited and high cost.

The core technology of the V-Optic™ is a unique internal reflection angle design and reflective material formulation, which maximises lumen output with general SMT LEDs and controls the colour temperature shift of the light.

Traditional light strip and neon light adopt stranded wire as conductor and use inserted pins as input Connector, still used by many companies. Glue and plastic heat-shrink tube enable the Connector to be waterproof, but too many failures had demonstrated this kind of Connector’s high risk of water ingress issues, especially for outdoor use.

The core technology of the Insulfit™ is to integrate mechanical design and water-repellent chemical’s advantages. By assembling the mechanical Connector to squeeze the special formula silicone gasket coated with sealing silicone grease, the light end is hermetically sealed.

In recent years, FPCB has been introduced into the flexible linear light as conductor, along with SMT technology development, which improve the
production efficiency of LED flexible linear light and extend the product’s function, while also limiting the development of LED flexible linear light because of its flexibility.

The TwinFlex™ technology integrates FPCB with copper belt. This pioneering technology dramatically improve the performance of this kind of products, including reinforced mechanical strength, enhanced heat dissipation, broadened Connector pin connection, and augmented conductor with duplex circuit transmission to increase current carrying capacity and reduce voltage drop.